remote not working

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=46092
Printed Date: May 15, 2025 at 5:09 AM

Topic: remote not working

Posted By: marvel
Subject: remote not working
Date Posted: December 27, 2004 at 2:54 AM

i installed my alarm personally and everything is fine, execpt that my remote was wet and not working. now i cannot activate my alarm. my remote has 4 buttons.

where can i have a new remote and how can i program it in my alarm system. i went to shop where i bought the system but said that they cannot provide me new remote,instead told me to buy new alarm system. is there anything i can do.

in my alarm manual it has a learning code option, is this option for programming new remote.

thank you

-------------
turbo

Replies:

Posted By: xtremeaudio
Date Posted: December 27, 2004 at 4:35 AM

what kind alarm you make and model

Posted By: sparkie
Date Posted: December 27, 2004 at 3:53 PM

If your remote got wet it may have shorted out the micro-processor inside. You can try removing the battery and checking it to see if it still has power. Unless your alarm is a very cheap unit it shouldn't need re-programming.

-------------
sparky

Posted By: oruberz
Date Posted: December 27, 2004 at 9:53 PM

you can get one online @ remotesunlimited.com

-------------
omz