2000 Accord SE Factory Alarm Help

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=46126
Printed Date: May 17, 2024 at 9:45 PM

Topic: 2000 Accord SE Factory Alarm Help

Posted By: conbano
Subject: 2000 Accord SE Factory Alarm Help
Date Posted: December 27, 2004 at 4:36 PM

Does anyone know where the arm/disarmed wire for the 2000 Accord SE factory alarm at. I recent bought an Accord SE that has factory alarm with no remote control. So I went to a local store and has a keyless entry installed, the problem is everytime I use the remote to unlock the door that is locked by using the key, the alarm went off. I ask the installer, he said not much he can do because he can't find the arm/disarmed wire. And I'm stuck with it now. If anyone knows or has the diagram for the wire, please let know. Thanks in advance.

conbano@cox.net

Replies:

Posted By: Craig3708
Date Posted: December 27, 2004 at 4:54 PM

Alarm Input Wire:

BLACK/ WHITE (-)

4 PIN GREEN CONN. IN PASS FUSE BOX

Posted By: gfella2000
Date Posted: December 27, 2004 at 5:15 PM

Disarm without unlock is BLUE inside driver's door. For Accord LX with no factory alarm, use BLACK/ WHITE(lock) and GREEN/ RED(unlock) found on a two pin plug at the front of the driver's side fusepanel.

-------------
GFELLA 20000000000

Posted By: secureauto
Date Posted: December 27, 2004 at 9:06 PM

Here's a link for your wiring:

2000 Accord

-------------
ASE Certified

Posted By: profuse007
Date Posted: December 28, 2004 at 12:55 AM

design-tech use alarm input wire thats equivalent to door triggers.

Craig3708 wrote:

Alarm Input Wire: BLACK/ WHITE (-)4 PIN GREEN CONN. IN PASS FUSE

-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).

Posted By: mykicks007
Date Posted: December 28, 2004 at 2:28 PM

Hey everyone,

i'm posting my question here, cuz it relates...

I have found 2 different wiring diagrams for my 2000 honda accord. On one it says to cut the started wire AFTER fuse panel, not at ignition switch, and the other says cut the started wire between keyswitch and fusebox. Which is right ?

Also, one lists a 3rd ignition wire, but not a 2nd ?

Thanks

Posted By: conbano
Date Posted: December 30, 2004 at 3:21 PM

Thanks all for reply, but I have one more question. Does the Blue wire accept neg or pos signal? I don't want to fry the circuit board. Thanks

Posted By: snguyen
Date Posted: December 30, 2004 at 3:33 PM

neg