Print Page | Close Window

Neutral Safety Switch

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=46170
Printed Date: May 13, 2025 at 11:42 AM


Topic: Neutral Safety Switch

Posted By: realsynthetics
Subject: Neutral Safety Switch
Date Posted: December 27, 2004 at 11:34 PM

I'm installing an alarm/starter combo on my car...and was wondering if its necessary to use the neutral safety feature... If its mandatory to tap into the wire for my starter's setup. Thanks for any help

-Duncan




Replies:

Posted By: rudef2
Date Posted: December 28, 2004 at 12:14 AM

It is mandatory to tap it if it is a standard/manual transmission car. An absolute must for safety sake.

if it is an automatic transmission you can just ground it in order for it to remote start. Only do this if you car will not crank while in gear. (most automatics dont, but just in case)


Print Page | Close Window