2000 Accord wiring

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=46256
Printed Date: May 10, 2025 at 6:06 PM

Topic: 2000 Accord wiring

Posted By: mykicks007
Subject: 2000 Accord wiring
Date Posted: December 28, 2004 at 9:16 PM

Hey guys,

I have found 2 different wiring diagrams for my 2000 honda accord. On one it says to cut the started wire AFTER fuse panel, not at ignition switch, and the other says cut the started wire between keyswitch and fusebox. Which is right ?

Also, one lists a 3rd ignition wire, but not a 2nd ?

Thanks

Replies:

Posted By: KarTuneMan
Date Posted: December 28, 2004 at 9:27 PM

Starter kill between the keyswitch and the fusebox.....SAYS DEI, keeps the check engine light from coming ON

-------------

Posted By: SoundFX411
Date Posted: December 29, 2004 at 7:17 AM

I have done a few of these cars and at first I used Omega's wiring specs and cut after the fuse and then I used the DEI specs and cut between the fuse and IGN and still no CHECK ENGINE light. Maybe I'm just lucky.

-------------
SoundFX

Posted By: mykicks007
Date Posted: December 29, 2004 at 9:27 AM

Thanks, i think i'll go with DEI specs.

Posted By: mykicks007
Date Posted: December 29, 2004 at 9:39 AM

One more thing ....

What's the difference between:

Disarm Defeat and Disarm no unlock ?

These digrams have both, and which do i use for disarm while remote start ??

Thanks

Print Page | Close Window