How do I make a standard LED blinking ?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=46287
Printed Date: April 29, 2024 at 11:30 AM

Topic: How do I make a standard LED blinking ?

Posted By: hakkinen
Subject: How do I make a standard LED blinking ?
Date Posted: December 29, 2004 at 11:15 AM

I want to know how I can make a standard 12V LED blink please.

Any help is much appreciated.

-------------
cheers

Hakkinen

Replies:

Posted By: jaurora
Date Posted: December 29, 2004 at 11:57 AM

You need to use an RC circuit.

Depending on the seconds between blinks will determine what size capacitor you will need.

-------------
MECP certified (If it really means anything)
Jeremy

Posted By: xetmes
Date Posted: December 29, 2004 at 3:14 PM

look up 555 led flasher, easy way to get an accurate flash speed

Print Page | Close Window