PATS harness 03 explorer

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=46290
Printed Date: May 10, 2025 at 3:21 PM

Topic: PATS harness 03 explorer

Posted By: Hymer
Subject: PATS harness 03 explorer
Date Posted: December 29, 2004 at 11:50 AM

I have a pkf-3 for a 03 exlorer. according to bypasskit It should be a type B 4 pin pats connector.
My problem is I can't seem to find it. I have a connector with 6 pins and 5 wires. blk,wht,grn,red,yel everything shows ground exept the red this is +12v constant, not ign. Is this the right harness? Of course bypasskits arn't answering their damn tech line.. HELP!! please...

Thanks guys..

-------------
Tire Proz Stillwater Mn
High End Restyling and Comlete Repair

Replies:

Posted By: snguyen
Date Posted: December 29, 2004 at 1:37 PM

follow the wiring from the ECM. Look for the connector simiar to the diagram include with your mod.

Print Page | Close Window