02 Civic Alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=4637
Printed Date: May 21, 2024 at 12:06 PM

Topic: 02 Civic Alarm

Posted By: kendrick20
Subject: 02 Civic Alarm
Date Posted: October 20, 2002 at 12:34 AM

Waz s'up y'all!!!!!

I just bought a brand new alarm (CRIME Guard) from Ebay. I've already read the installation manual book, but it kinda hard to understand. Can you guys help me to get start it. I can bring my car to the shop and they will install it for $50. But I don't want them to mess up my car so I try to do it by myself.

By the way, my car is 2002 civic 4drs LX

thanks alot............

Replies:

Posted By: SOUND PRESSURE
Date Posted: October 20, 2002 at 12:45 AM

https://www.the12volt.com/installbay/display_topic_threads.asp?ForumID=7&TopicID=4624&SearchPagePosition=1&search=2002+honda+civic&searchMode=allwords&searchIn=Thread&forum=0&searchSort=dateDESC&ReturnPage=Search

The wiring diagram was provided through a previous post from Jeff. Hope this will help you out. Don't forget to use a multi-meter to test all wires before you connect them.

-------------
Sound Pressure

You know you have the right amount of pressure when your eyes start to water! Now you've got Juice!

Posted By: Velocity Motors
Date Posted: October 20, 2002 at 8:48 AM

If that's all they are charging you for the WHOLE installation .... go for it !! The vehicle requires you to bypass the Immobilzer chip in the key and these modules alone are worth about $ 30.00 US. Did they say that everything was included for the $ 50 ? I would let a professional do this install if I were you.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: kendrick20
Date Posted: October 20, 2002 at 8:22 PM

Oh NO Jeff, just for the installation (without parts), But by the way I just got the alarm installed today. BY MYSELF. THANK YOU SO MUCH FOR YOUR HELP GUYS, I APPRECIATED. And I got a little question, I can't find where is the door trigger at (drivers trigger is green, front passenger door trigger is light GREEN/ red. and the rear door trigger is GREEN / WHITE).

And where is the "factory alarm plug" (green plug above the drivers kick panel<I'm sorry but I don't know where the hell it is.>)

And 1 last thing, It's seem that the sensor doesn't work, I install it properly (i mean 100% right).

Thanks for your help guys

Posted By: Velocity Motors
Date Posted: October 20, 2002 at 8:40 PM

The drivers door trigger is green, front passenger door trigger is lt. GREEN/ red, and the rear door trigger is GREEN / WHITE. Diode isolate each trigger point from each other.
It may be high above the fuse box or taped up high along side the radio side of the kick panel
The impact sensor may have a delay on it before it's actually activated. Make sure you give it about 2 - 3 minutes before you try to test the sensitivity.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: kendrick20
Date Posted: October 20, 2002 at 10:43 PM

Thanks Jeff!!!!!

Where can I buy the relays at?

And what is "diode" mean?

Posted By: Velocity Motors
Date Posted: October 21, 2002 at 7:43 AM

You can buy relays and diodes ( https://www.the12volt.com/diodes/diodes.asp ) at any electronics store like Radio Shack, Stereo Shop or an Electronics Repair shop.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: NONONO333
Date Posted: October 21, 2002 at 10:01 PM

what do you need the relay for? apparently there is no use for relays if everything works A-O-K. but you will need the diodes..if you go to radio shack, ask for 1amp diodes...if you need help on understanding diodes, or how to hook it up...go here.......https://www.the12volt.com/diodes/diodes.asp

good luck

-------------
STEVE P.

Posted By: kendrick20
Date Posted: October 26, 2002 at 12:03 AM

Hey, is me again.

I don't know which wire is the "door pin switch(+), hood pin switch, door pin switch (-), Dome light output, door lock outputs, and trunk release wire"

Thanks alot for your help guys........

Posted By: Velocity Motors
Date Posted: October 26, 2002 at 9:02 AM

Notes:
NOTE: This vehicle has an immobilizer system that needs to be bypassed when adding remote start. *1 The factory alarm plug is a green plug above the drivers kick panel. *2 The drivers door trigger is green, front passenger door trigger is lt. GREEN/ red, and the rear door trigger is GREEN / WHITE. *3 In the top left plug. *4 It is a 2 pin plug to the passenger side of the battery. *5 The PCM is behind the glove box. The vss is in a connector A (31 pins), pin 18. The vss is also blue/white at the cruise control module to the left of the steering column.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA