Print Page | Close Window

Ultra Start 4500 Manual Tranny

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=46372
Printed Date: June 08, 2024 at 7:26 AM


Topic: Ultra Start 4500 Manual Tranny

Posted By: AccentShow
Subject: Ultra Start 4500 Manual Tranny
Date Posted: December 30, 2004 at 10:41 AM

Hey everybody I'm looking for some direction with this problem I'm having. My car is automatically arming once the engine is off. I've gone through the manual a few times, tried all the settings and things and still can't figure it out. I would go back to the place I got it and have them fix it, but it's an hour away! So if anyone has some advice I would greatly appreciate it!



Replies:

Posted By: ratman1974
Date Posted: December 30, 2004 at 11:15 AM
Check your door triggers....alarms usually arm when last door is closed...with a time limit...maybe the alarm thinks the door is closed..
Ever try turning auto arm off?

I'm not a pro, but figured I'd just give you my opinion.




Posted By: AccentShow
Date Posted: December 30, 2004 at 1:26 PM
Yea I've tried to find the auto arm and haven't found it in the book, most alarms arm when you arm them, I don't want it to arm on it's own that's y I'm looking for some advice, I'm hoping someone who is a dealer will respond.




Posted By: TooDark
Date Posted: December 30, 2004 at 3:57 PM
OK here we go:
within 3 seconds turn your ing key On-Off-On-Off-ON, press antenna button one time (lights will turn on), press button 1 on remote, press program button 5 times (the LED will flash 5 times)
press and HOLD program button (you will hold the button until the lights flash and siren sounds 3 times then release)

That will set the alarm to only activate when you do it from the remote




Posted By: AccentShow
Date Posted: December 30, 2004 at 11:44 PM
thanks alot...I knew there had to be a way but I couldn't find an installers manual on Ultra starts website and the shop I got it at didn't give me one. Thanks again!




Posted By: AccentShow
Date Posted: December 30, 2004 at 11:45 PM
thanks alot...I knew there had to be a way but I couldn't find an installers manual on Ultra starts website and the shop I got it at didn't give me one. Thanks again!




Posted By: TooDark
Date Posted: December 31, 2004 at 1:10 PM
If you cant get it to work email me and I will give you my number and I will talk you through it

toodarkmotorsports@yahoo.com





Print Page | Close Window