Mitsui Lancer 2003

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=4644
Printed Date: June 01, 2024 at 4:14 PM

Topic: Mitsui Lancer 2003

Posted By: SoundFX411
Subject: Mitsui Lancer 2003
Date Posted: October 20, 2002 at 10:26 AM

I'm installing an Excalibur RS-4LX remote start in this car. When the system ignites the starter keeps running. Does anyone have a wiring diagram for this car?

-------------
SoundFX

Replies:

Posted By: Velocity Motors
Date Posted: October 20, 2002 at 11:41 AM

You either have the incorrect tach signal or you have not programmed the RS unit to the Lancer properly.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: SoundFX411
Date Posted: October 20, 2002 at 2:19 PM

The RS unit says that you don't need a tach wire because of the SMART TACH. Do I need to install the tach wire? Thank You for your input

-------------
SoundFX

Posted By: Velocity Motors
Date Posted: October 20, 2002 at 4:00 PM

If the car's starter is staying engaged, I would use the tach wire and make sure that you flip any switches over that you need to for tachless and tach required modes.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Print Page | Close Window