Link needed: Viper 130 install guide

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=46482
Printed Date: July 19, 2025 at 2:16 AM

Topic: Link needed: Viper 130 install guide

Posted By: randman1
Subject: Link needed: Viper 130 install guide
Date Posted: December 31, 2004 at 11:13 AM

I'm trying to help a member on another forum and need to take a peek at the install guide for a Viper 130 XR remote starter.

Thanks.

Replies:

Posted By: randman1
Date Posted: January 20, 2005 at 7:28 PM

OK... maybe someone can just verify the lock outputs for me. Are they reversing polarity or negative output only?

Note: I can't edit my posts so I can't correct the type-o above. It is a 130XV not XR

Posted By: Ravendarat
Date Posted: January 20, 2005 at 10:06 PM

They are only negative outputs. The manual said they were reversing but it was a misprint

-------------
double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer

Posted By: randman1
Date Posted: January 21, 2005 at 11:25 AM

Thanks. Does that mean that blue is lock and green unlock? Or do I have them reversed?

Print Page | Close Window