99 ram lock-unlock problems

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=46491
Printed Date: July 16, 2025 at 7:01 AM

Topic: 99 ram lock-unlock problems

Posted By: mrwhitehat
Subject: 99 ram lock-unlock problems
Date Posted: December 31, 2004 at 2:02 PM

Hi,
Got the autostart on the Marksman M6a working, but not the keyless entry.

I tied the unlock and lock outputs to the unlock and lock switches for the trucks electric locks.
It does not work.
Any suggestions?

Does anyone know the wire colors for the following on the 99 ram? [I may just try the driver's side first 5-wire method]
Driver's side motor (+) =
Power unlock switch =
Power lock switch =
Lock motor =
Unlock motor =

Any other suggestions would be helpful!

Replies:

Posted By: profuse007
Date Posted: December 31, 2004 at 2:06 PM

| POWER LOCK|ORANGE / purple *1 |5wi|driver door harness |
| POWER UNLOCK|pink/purple *1 |5wi|driver door harness |
*1 Keyless models use positive trigger for lock, and 5-wire for unlock. Can also find wires at the central timer module to the right side of the steering column, lock is ORANGE / green, unlock is pink/green.

-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).

Posted By: mrwhitehat
Date Posted: December 31, 2004 at 2:09 PM

I have it tied in as you specified above. Do I have to install a relay?

Posted By: profuse007
Date Posted: December 31, 2004 at 2:11 PM

yes you need a relay for each 5wi

-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).

Print Page | Close Window