Valet button, Where is it?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=46556
Printed Date: May 14, 2024 at 5:21 PM

Topic: Valet button, Where is it?

Posted By: percyv143
Subject: Valet button, Where is it?
Date Posted: January 01, 2005 at 11:04 AM

i have an alarm model LD 168-6C and i can't understand. where is the "valet button"? is it the same as the "override switch"? the remote button has this 4 button configurartions:

1 - (lock/unlock)
2 - (picture of the back of the car with trank opened/vehicle locator) - this is for trank remote open
3 - (chirp on / off) - this is for silent and sound mode for alarm
4 - (window up)

link to alarm diagram :

https://percyv143.home.comcast.net/pix/alarm1.jpg

thanks.

Replies:

Posted By: percyv143
Date Posted: January 01, 2005 at 12:06 PM

one part of the manual says "

15. Valet Mode:
From the disarmed condition, turn ignition key to the on position, then press and hold the valet push button switch until the dash mount LED blinks slowly.

that's where the problem is, i don't know where the valet button switch is. :(

Posted By: swamprat323
Date Posted: January 01, 2005 at 1:00 PM

you should be able to jsu tuse the switch for programing. do as the mnaural says but instead of the button movie it to the ON position. if that dont work try it the other way.

Can you scan the whole manural in.

Posted By: percyv143
Date Posted: January 01, 2005 at 4:35 PM

sorry, i got no scanner.
i tried to use button#2 on "ON" position and valet mode worked... thanks anyway...

Print Page | Close Window