Automate 410 arm/disarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=46594
Printed Date: July 13, 2025 at 9:33 AM

Topic: Automate 410 arm/disarm

Posted By: candb
Subject: Automate 410 arm/disarm
Date Posted: January 01, 2005 at 6:36 PM

Hi, I am trying to fit a remote starter to a 2002 Hyundai Sonata. It has an AUTOMATE 410 security system fitted. I would like to keep the features of this system, but use only one remote for the car (the autostart remote). To allow me to do this I need to know the arm and disarm wire colors/pin numbers on the AUTOMATE 410, plus whether they are triggered with a +or - pulse. Can anyone help?

Barry

Replies:

Posted By: kevindanielk
Date Posted: January 02, 2005 at 3:36 AM

The Automate 410 does not have separate arm and disarm input wires on the brain. It's not a security system. It is basically a keyless entry unit that is armed and disarmed with it's supplied remotes. This is the PDF install manual for the AUTOMATE 410. Hope it helps.

https://www.directechs.com/guides/manuals/ig/automate/N410A.pdf

-------------

Posted By: candb
Date Posted: January 02, 2005 at 9:16 PM

Thanks for the pointer

Posted By: candb
Date Posted: January 02, 2005 at 9:16 PM

Thanks for the pointer

Print Page | Close Window