open doors with alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=46614
Printed Date: May 10, 2024 at 7:41 AM

Topic: open doors with alarm

Posted By: 1low97s10
Subject: open doors with alarm
Date Posted: January 01, 2005 at 10:02 PM

i am going to shave the door handles off my s10. i got the 35lbs actuators and two relays to be used with alarm system as i was told. but i am not sure how to hook them up to my alarm? i have a viper 791xv. thanks eric.

Replies:

Posted By: draasch
Date Posted: January 01, 2005 at 10:18 PM

you will use the trunk release for one door and you can use the second channel for the other door.

the outputs most of the time are - outputs....depending on what polarity you need for the door poppers, will dictate how you wire up the relays.....

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Posted By: bigjeep
Date Posted: January 02, 2005 at 9:04 PM

well are the outputs on the alarm neg. pulse? if so you can wire up the popers two ways. i recomend hooking the white wire to 12v. and then using a relay to pop the door. wire the relay so, 87 to ground, 85 to 12v, 86 to the output from the alarm, and 30 to the black wire on the poper.

Print Page | Close Window