Print Page | Close Window

ford f150 air bag after r/s install

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=46686
Printed Date: August 30, 2025 at 7:01 AM


Topic: ford f150 air bag after r/s install

Posted By: mainormoscoso
Subject: ford f150 air bag after r/s install
Date Posted: January 02, 2005 at 5:31 PM

I did a 1998 F-150 everithing works fine but the air bag bulb came on after install,  any body had this problem before? I do remeber disconecting a harness from the fuse block could that had  set the air bag bulb to come on?



Replies:

Posted By: Teamrf
Date Posted: January 02, 2005 at 7:06 PM
Depending on what harness it was..first try resetting the computer, if that doesn't work go back and check your connections on the remote start...make sure all ignitions, and starters are powered up.

-------------
~The Rookie~
Rookie of the year that is...
Don't let the smoke out of your equiptment..it doesn't go back in.




Posted By: bigjeep
Date Posted: January 03, 2005 at 7:51 AM
you need to check if you gave power to the grey / YELLOW 12 gauge wire in the ign. harness, also did you tie into the blue wire for the horn? that wire runs through the airbag harness from the steering wheel.




Posted By: mainormoscoso
Date Posted: January 03, 2005 at 3:15 PM

I got all the conections ok, i will take it to the dealer and have the computer reset and post the results thanks.






Print Page | Close Window