remote start w/ keyless entry

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=46690
Printed Date: May 17, 2024 at 7:31 PM

Topic: remote start w/ keyless entry

Posted By: repmud
Subject: remote start w/ keyless entry
Date Posted: January 02, 2005 at 6:05 PM

I just finished installing an Ultra Start 4500 on my truck (2002 GMC Sierra). I did not hook up any of the alarm features, only the remote start and keyless entry. The start function works great, but how do I get the factory alarm to work when I lock my doors? I thought the factory alarm would set when I hit the lock button twice. I have it hooked up at the door switch, if I change it to the BCM location will this arm and disarm the alarm?

Replies:

Posted By: Teamrf
Date Posted: January 02, 2005 at 7:04 PM

You have to interface the alarm with the factory alarm wires.

-------------
~The Rookie~
Rookie of the year that is...
Don't let the smoke out of your equiptment..it doesn't go back in.

Posted By: repmud
Date Posted: January 02, 2005 at 8:34 PM

Teamrf wrote:

You have to interface the alarm with the factory alarm wires.

How do I go about doing that?

Posted By: repmud
Date Posted: January 02, 2005 at 8:35 PM

Teamrf wrote:

You have to interface the alarm with the factory alarm wires.

How do I go about doing that?

Print Page | Close Window