make led flash

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=46713
Printed Date: June 04, 2024 at 8:57 PM

Topic: make led flash

Posted By: satchmoe27
Subject: make led flash
Date Posted: January 02, 2005 at 9:22 PM

I just bought some leds from streetglow. The leds do not blink. I want to use them to replace my old led on my alarm. Is there a way to make the new leds blink. Or will they blink automatically if I tap into my existing led wiring. And how can I tell if they are pulling to much current from my battery.

-------------
screamon deamon

Replies:

Posted By: Craig3708
Date Posted: January 02, 2005 at 9:25 PM

If your existing led used to blink, and you use the same connection the new led will blink. As for the amonut of current the led will draw, you would have to put alot of leds on your ride to affect your battery.....

Craig.

Print Page | Close Window