oem honda door locks with remote start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=46811
Printed Date: July 15, 2025 at 4:39 PM
Topic: oem honda door locks with remote start
Posted By: tarasdad
Subject: oem honda door locks with remote start
Date Posted: January 03, 2005 at 8:17 PM
I know this question has probably been asked a hundred times before, but I installed a rattler 369d in my 02 odyssey. Everything works great, but I was wondering if there was a way to utilize the FACTORY key fob to lock\unlock the doors while it is remote started, as I know the factory rke doesnt work when the car is running. Thanks in advance! This sight is awsome!!
Replies:
Posted By: auex
Date Posted: January 03, 2005 at 8:23 PM
If from the factory the factory keyfob doesn't work with the car on, then the answer is no.
-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
Posted By: tarasdad
Date Posted: January 03, 2005 at 8:31 PM
thanks for the quick response auex, i guess i will get used to the rattlers lock/unlock!
-------------
Never be too busy chopping wood to take time to sharpen your axe.
Posted By: profuse007
Date Posted: January 03, 2005 at 11:12 PM
i think you can interrupt the keysense wire at the key cyl while RS. look at the non-data/synch harness. (-) when key put in.
iam fixin to test a RS add-on on an 01 CL and interrupt the keysense to make the OEM fob to be available when RS.
-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).
Posted By: tarasdad
Date Posted: January 04, 2005 at 7:40 PM
Hey, profuse007. I did try breaking the keysense wire, but down at the door lock module behind the glove. still no factory lock/unlock. I didnt want to use the keysense wire by the lock cylinder because it ties into the transponder bypass, but i couldnt imagine it making any difference. any other ideas? ------------- Never be too busy chopping wood to take time to sharpen your axe.
Posted By: audifive
Date Posted: January 04, 2005 at 10:08 PM
sometimes it has to do with the ignition or acc. wire seeing 12+, not keysense wire. maybe if the dorrlock module has an acc. hookup, you can break that connection. just a thought...good luck
|