Print Page | Close Window

94 nissan altima door locks not working

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=46877
Printed Date: July 23, 2025 at 2:05 AM


Topic: 94 nissan altima door locks not working

Posted By: HELPPLEASE22
Subject: 94 nissan altima door locks not working
Date Posted: January 04, 2005 at 1:11 PM

HEY,  how is everyone....well i got a problem i was installing a remote start with keyless in a 94 nissan altima gxe.. everything went smoothly till i went to find the door lock wires and i probed it and stupid me sent 12 volts to it.  It should of locked or unlocked it but instead i got a spark.... and also no more power locks.  I checkd for fuses and i cant seem to find  any that are blown.  I know there is a door lock timer in the car??? could there be a fuse in there. also i could of not shot the wire??? i dunno i am pissed and i dont care if i  just get the drivers door to work prob wit an actuator.  if anyone can help me it would be greatly appreciated.... thankssss



Replies:

Posted By: Jschult3
Date Posted: January 15, 2005 at 3:00 PM

Try posting this into the security section as well but-

I know you need to hit the smaller/thinner wires to make this system work. It's a neg system but interfacing with the heavy gauge wire can damage the circuit. Check for continuity between motor and switch.

Try pulling the neg batt cable for a while

Does the pass side work?



-------------
Jeff
Always Verify Wire information before Connecting! Just a Darn Good DIY'R


Print Page | Close Window