Print Page | Close Window

security disable

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=46885
Printed Date: July 21, 2025 at 7:58 PM


Topic: security disable

Posted By: mobile melody
Subject: security disable
Date Posted: January 04, 2005 at 1:45 PM

I am installing a remote starter in 2000 gmc full size pickup and the wire guide calls for using the light green wire to brown plug of  BCM.  The bypass 555L calls for use of  yellow wire from ignition tumbler .  I chose the yellow wire and all worked well.  My question is ; would either wire have worked ?

-------------
new but learning fast



Replies:

Posted By: KarTuneMan
Date Posted: January 04, 2005 at 2:44 PM

I dont know how a 555L works (I use astroflex) but there are 2 yellow wires at the ignition bundle....one is "start" and

the other is the passlock R code wire. This is used for the passlock ignition override.

The Lt. Green wire at the BCM disarms the "door security"   They are 2 different things



-------------




Posted By: mobileworks
Date Posted: January 04, 2005 at 4:00 PM

Kartune man is right on, it would not have worked had you used the light green wire...

On a side note a properly bypassed passlock2 system will automatically disarm the factory security...



-------------





Print Page | Close Window