remote start keyless entry help
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=46924
Printed Date: May 22, 2024 at 5:35 PM
Topic: remote start keyless entry help
Posted By: repmud
Subject: remote start keyless entry help
Date Posted: January 04, 2005 at 7:32 PM
I have posted this before but it didn't make sense to the reader. Hopefully I cleaned it up a bit.
I installed a remote starter with keyless entry. My truck had a factory keyless entry system that would arm the alarm when you hit the lock button twice on the key fob, also the horn would beep to let you know it's armed/locked. My question is how do I get the remote start/keyless entry to do that, so I do not have to use the stock key fob to arm the alarm? I have the lock/unlock pulse hooked up inside the door just after the switch. Do I need to move this to the BCM to solve my problem? Also, does the factory double pulse unlock (key fob) work off of the one wire at the BCM? Please help, this has been driving me nuts for days. 2002 GMC Seirra 1500.
Replies:
Posted By: swamprat323
Date Posted: January 04, 2005 at 7:51 PM
What make and modle of your keyless entry/RS
Posted By: repmud
Date Posted: January 04, 2005 at 7:53 PM
it's an ultra start 4500, I don't want to use any of the alarm features.
|