How to flush brain’s memory?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=46981
Printed Date: July 20, 2025 at 4:25 AM
Topic: How to flush brain’s memory?
Posted By: dearfriend
Subject: How to flush brain’s memory?
Date Posted: January 05, 2005 at 3:28 PM
I have an Aladdin A-2000 2-way starter/alarm (many of you probably sick of hearing about this one by now). I just found that it does not follow some programming procedures correctly (responding codes are different and such), so I want to zero it to the factory setting and start from scratch, but there is seem no information how to do it in the books. Tech support is dead (as always).
Thank you for looking!
Replies:
Posted By: dearfriend
Date Posted: January 06, 2005 at 11:49 AM
Just had an idea (luck of suggestions, have to answer my own questions ;)
Would you say that "first connection" procedure from the manual is the one that clears the brain as well? What is the point of hoops we all jump through powering our alarms/starters for the first time?
Any ideas? Thanks a bunch!
|