use tach wire or injector wire

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=46988
Printed Date: May 19, 2024 at 10:51 PM

Topic: use tach wire or injector wire

Posted By: gforceman
Subject: use tach wire or injector wire
Date Posted: January 05, 2005 at 4:44 PM

motor cranks wont start on first time 2nd time a little backfire in mainifold - it was determined the crank time was to short - i am using the tach wire - should i use the injector instead ??? i have seen cars using this method , and what injector and which wire -- thx bunchies

Replies:

Posted By: Hymer
Date Posted: January 05, 2005 at 8:02 PM

either or, I usually go to injectors try both wires, I have never had a problem doing that... one will work and one won't... Good luck....

-------------
Tire Proz Stillwater Mn
High End Restyling and Comlete Repair

Posted By: slicksam
Date Posted: January 05, 2005 at 10:06 PM

look at all the injectors....usually there 2 wires going to each injector, 1 of those wires are all the same color on each injector.....use the other wire

-------------
Testing is the key

Print Page | Close Window