2003 Ram Parking Lights

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=47015
Printed Date: May 17, 2024 at 3:01 PM

Topic: 2003 Ram Parking Lights

Posted By: porkyman
Subject: 2003 Ram Parking Lights
Date Posted: January 05, 2005 at 9:20 PM

I've been reading the post concerning this problem and I cant find where to solve it. I have an Omega Max Remote Start/Security System and everything is connected right execpt the parking lights. I know I have to use a 330 ohm resister to activate the parking lights but once I press unlock on the remote a min later they come back on. I think you have to use a relay to keep this from happening. Can anyone explain to me how to get this accomplished? and where to get the parts to do so.

Thankyou:)

Replies:

Posted By: actionjackson
Date Posted: January 05, 2005 at 9:39 PM

I always go to the BLACK / YELLOW wire at the headlight, easy to get to, its a (+), no problems

-------------
Jamie Jackson
*CRIMPING AINT EASY*

Posted By: slicksam
Date Posted: January 05, 2005 at 9:43 PM

according to my notes 2004, it is white green, using a relay and a resistor.

so this should be the same

https://img42.exs.cx/img42/4867/dodgeram15002005parklights5em.jpg

-------------
Testing is the key

Posted By: porkyman
Date Posted: January 05, 2005 at 10:12 PM

howmay amp relay would you reccommend?

Posted By: Williegz
Date Posted: January 06, 2005 at 1:29 PM

hey guys, I am doing one and I can not get these door locks to work. Can I get some help with that?

-------------
Wm Gonzalez

Posted By: KarTuneMan
Date Posted: January 06, 2005 at 1:45 PM

The parking light is purple / YELLOW it needs to be "brken" with the a relay and resistor.

87a gets the switch side of the wire

30 gets the car side of the wire

86 and 87 ground with the resistor in line

85 gets trigger from the alarm or RS

works perfect every time!!

-------------

Posted By: mobileworks
Date Posted: January 06, 2005 at 6:21 PM

Lock Requires A Ground (-) Pulse Through A 867 Ohm Resistor. Unlock Requires A Ground (-) Pulse Through A 364 Ohm Resistor. Single wire door lock system...

Factory arm and disarm wires will also lock and unlock the doors as well as arm and disarm at the same time, if equipped....requires different resistance values...

-------------

Posted By: BNLUIS
Date Posted: January 06, 2005 at 7:35 PM

I use a WHITE/ Grey wire above the Driver kick panel. it is positive no relays required.

-------------
Luis
Sound Waves
Is up to the installer to test all wires with a DMM whenever possible.