1996 ford contour keyless entry

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=47053
Printed Date: May 14, 2025 at 8:40 PM

Topic: 1996 ford contour keyless entry

Posted By: don-key1
Subject: 1996 ford contour keyless entry
Date Posted: January 06, 2005 at 11:34 AM

I'm waiting on a keyless entry system for the above metionned car it has power door locks but no factory keyless entry. Is there anyting special I should know, it's a 3 wire positive if I remember correctly, there are two wires in the lower door sill and/or kick panel, though I can't remember the colours right now. Any relays, diodes or resistors required?

Thanks in advance, Don.

-------------
There's no such thing as a stupid question!

Replies:

Posted By: slicksam
Date Posted: January 06, 2005 at 1:17 PM

lock = WHITE/ green location = driver kick panel

unlock = YELLOW /GREEN location = driver kick panel

here is how to hook it.... https://www.the12volt.com/doorlocks/page3.asp

it is the 3 wire positive doorlocks

-------------
Testing is the key

Posted By: don-key1
Date Posted: January 07, 2005 at 8:24 AM

Thanks, I appreciate the help!

Don

-------------
There's no such thing as a stupid question!

Posted By: don-key1
Date Posted: January 13, 2005 at 3:48 PM

Got it done in less than 2 hours.

Thanks to all who helped.

Don.

-------------
There's no such thing as a stupid question!

Print Page | Close Window