Advice for Auto-Lock on Viper350HV

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=47138
Printed Date: July 16, 2025 at 7:04 AM

Topic: Advice for Auto-Lock on Viper350HV

Posted By: Okiejeep
Subject: Advice for Auto-Lock on Viper350HV
Date Posted: January 07, 2005 at 12:58 PM

I have a Viper 350HV and when it was installed it has the auto-lock feature that locks the doors when the ignition key is turned on w/about a 2-3 second delay.

Is there an easy way to dissable this feature as it's getting very annoying.

Thanks,
Eric

Replies:

Posted By: Okiejeep
Date Posted: January 07, 2005 at 2:06 PM

Thanks for the information. Problem is I recently moved and can't seem to find my Alarm Box which had the Owners Manual inside it for "safe" keeping.

Any links to an owners manual online?

Posted By: Okiejeep
Date Posted: January 12, 2005 at 3:56 PM

I found the owners manual and it doesn't say how to turn this feature off/on. It just says it's a feature.

Anyone know if this is programable w/my remote or if you have to do something else?

Also, if you can suggest the key sequence on the remote that'd be helpful too. BTW, it has the 3 button (triangular shaped) remote.

Thanks.

Posted By: meltingplastic
Date Posted: January 12, 2005 at 4:37 PM

open a door, turn the ignition on then off.. hold ur valet button and wait for the led to blink once and the horn to honk once, then press your valet button 5 times.. holding on the fifth time.. press the unlock button. close ur door.. that should turn ur active locking off..

-------------
Driving a Bagged, Caddied 02 s10

Posted By: auex
Date Posted: January 12, 2005 at 5:32 PM

It is called ignition controlled locks.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Posted By: Okiejeep
Date Posted: January 12, 2005 at 9:42 PM

Thanks all... hope this works. :)

Posted By: Okiejeep
Date Posted: January 13, 2005 at 3:22 PM

Oh yeah... if I run thru either of these procedures and it happens that this is the wrong instructions for my 350HV could I screw up the alarm system all together?

Posted By: Okiejeep
Date Posted: January 14, 2005 at 7:24 AM

THANKS for the help. I tried what you suggested and it seemed to work last night. However, this morning when I got in my Jeep to head to work the ignition/door locks were back to auto lock again posted_image

It's almost as though the alarm reset to the previous settings.

Anymore suggestions? I'm going to try programming it to not auto lock again as before, but can do other things if needed.

Thanks.

Posted By: dmguertin
Date Posted: January 14, 2005 at 7:17 PM

Here is a link to your Owners Manual

https://www.directed.com/guides/manuals/og/viper/G426V_07-04.pdf

Posted By: gcorrea
Date Posted: January 14, 2005 at 9:03 PM

posr your results i have the install manual and the owners manual.

-------------
gcorrea

Posted By: Okiejeep
Date Posted: January 17, 2005 at 7:16 AM

Thanks for the instruction .pdf file. I'll print off and see what I can figure out. I'll post back w/results.

Thanks again. Very helpful information.

Posted By: Okiejeep
Date Posted: January 18, 2005 at 9:21 AM

Again... thanks a bunch for the link to the pdf file for installation information. That worked like a charm and helped me to understand some of the features of my alarm.