Print Page | Close Window

2003 Tiburon remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=47153
Printed Date: July 13, 2025 at 6:26 PM


Topic: 2003 Tiburon remote start

Posted By: ziggyb222
Subject: 2003 Tiburon remote start
Date Posted: January 07, 2005 at 6:21 PM

I installed a remote start in a 2003 Hynd Tiburon. Unit seemed to work well in the shop. Customer came back with with a no start. Tried it and sure enough nothing. Was wondering if the factory alarm could hold it up. Saw something about the only way to disarm was with factory fob..Is this the case???




Replies:

Posted By: jrilla
Date Posted: January 07, 2005 at 7:35 PM
It looks like if you set your unlock pulse for a 2.8 second duration then branch off the unlock wire so it powers up the Acc, Ign and the bypass module, and it looks like the key sense wire too. You need to energize the Ign wire witha relay, the Acc wire with a relay and then if you do not have an onboard unlock relay you could use a single relay to send a ground pulse to the unlock wire, the keysense wire, and the (-) when running input on the bypass module. You need to diode isolate these wires though. Email me (don't PM me)if you have any questions.

-------------
J Rilla

Owner/Installer


Print Page | Close Window