Print Page | Close Window

shock sensor sensitivity

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=47171
Printed Date: May 15, 2024 at 7:52 PM


Topic: shock sensor sensitivity

Posted By: mdb_utphy
Subject: shock sensor sensitivity
Date Posted: January 07, 2005 at 9:22 PM

Hi. I mounted my shock sensor on the right side of my vehicle, to the bare metal with self-tapping screws. The stage 1 warning only seems to trigger with shocks to the right side of the vehicle. I want the sensitivity to be equal on both sides of the vehicle. What can I do? Should I just mount the unit to something in the center of the vehicle? Thanks.



Replies:

Posted By: wblakes
Date Posted: January 07, 2005 at 9:42 PM
tie it to a big harness



Posted By: godd dan it
Date Posted: January 07, 2005 at 11:51 PM

Yeah relocate it somewhere else.




Posted By: gcorrea
Date Posted: January 08, 2005 at 12:34 AM
if that doesnt satisfy you add another shock sensor.

-------------
gcorrea


Print Page | Close Window