2001 honda accord sedan

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=47218
Printed Date: May 10, 2025 at 10:19 AM

Topic: 2001 honda accord sedan

Posted By: wgasca
Subject: 2001 honda accord sedan
Date Posted: January 08, 2005 at 3:51 PM

I'm trying to install a 2 way pager with remote start alarm. I'm having trouble with a couple wires - Glow plug Input (+) / Passenger unlock output (-) / Ground output when running / Hood or trunk input (-) trigger / Factory alarm Disarm (-) / Factory alarm arm (-)

Also what do i connect the aux wires 1 2 3 from the alarm harness. There is a 3 pin connector that says to plug in
door lock unlock wire????

I also got a two way fm module with a call button in the center of it and it has 3 connectors on it a white 5 pin which i know where that goes/ a blue 2 pin connector? a red 2 pin connector? but i did not recieve a valet switch. is the blue connector my valet switch or do i have to get a seperate valet switch.

i f i could get some help from somebody i would appreciate it,

thank you
wgasca

Replies:

Posted By: profuse007
Date Posted: January 08, 2005 at 4:03 PM

what kind of unit are you using?

no need for glow plug, its for deisel.
ground out when running- it gives (-) when RS
input trggers- if open hood or trunk, arlm goes off.
no need for factory arm

whats teh accord trim package do you have? LX EX?

click on my sig for tutorial.

-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).

Posted By: wgasca
Date Posted: January 08, 2005 at 4:05 PM

i have a lx

Posted By: wgasca
Date Posted: January 08, 2005 at 4:06 PM

i have a lx and the unit is a galaxy 5005