alarm wiring

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=47299
Printed Date: June 04, 2024 at 1:17 AM

Topic: alarm wiring

Posted By: wgasca
Subject: alarm wiring
Date Posted: January 09, 2005 at 4:57 PM

I have a 01 honda accord lx sedan and i bought a commando car alarm remote start w/ way pager and i know where all the wiring goes eccept for a couple.

-ground output when running
-connect to a 30 amp relay for starter disable output (-)

if anyone can help me i would appreciate it

thank you

Replies:

Posted By: ah64mark
Date Posted: January 09, 2005 at 7:22 PM

ground output when running (-) is for a key bypass kit . so you can start your car via remote without a key. if your key has a resister or transponder in it you will need this unit or you will be unable to start you car without a key in the cylinder. if you can start your car now by remote, no need to worry about this wire. if you cant , put the key in the cylinder and start it with the remote , if it starts you need an external bypass kit.

starter disable output(-) is usually an orange wire from the alarm. you will be able to find out how to wire this with a relay , to the left colum under CAR SECURITY (starter interrupts) you will need an external relay for this application

i hope this helped

-------------
ah64mark

Posted By: dar1
Date Posted: January 09, 2005 at 10:41 PM

Exactly. On point with the infomation.......I can't put it any better myself. In short the ground output when running(-)is to interface with remote start bypass . And the starter disable output(-) is for exactly that starter interupt which is to be wired with a relay NO/NC...

-------------
one love

Posted By: wgasca
Date Posted: January 09, 2005 at 11:33 PM

so in other words thos 2 wires connect to the bypass module

Posted By: KarTuneMan
Date Posted: January 09, 2005 at 11:47 PM

Only the ground while running does. The other get wired in to a relay for your starter disable. Look on this site under "relays" for an example of how to do that........

Good luck

-------------

Posted By: KarTuneMan
Date Posted: January 09, 2005 at 11:48 PM

-------------

Posted By: dar1
Date Posted: January 10, 2005 at 12:40 AM

Hope not confusing you. As you can see thanks to the KarTuneMan they serve different purposes. Hope everything works out with your install..

-------------
one love