Print Page | Close Window

2005 acura tsx

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=47308
Printed Date: June 01, 2024 at 11:07 AM


Topic: 2005 acura tsx

Posted By: hanhpham2k
Subject: 2005 acura tsx
Date Posted: January 09, 2005 at 6:48 PM

 Please help me ...I am installing a Clifford rs3.5 to my rsx . I did everything but I'm stuck on how to do the door lock and unlock ...

  Wiring saids : green(-)lock (+)unlock                                                                                                                             

                              blue)+) unlock (-) lock

    How do I connect these wires do I need a relay and/or do i need to cut any wires in the car lock /unlock ? Please help me . thank you so much




Replies:

Posted By: profuse007
Date Posted: January 09, 2005 at 8:05 PM
green- lock (-)
bluw- unlock (-)

plug it straight onto the objective wire.

-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).



Posted By: hanhpham2k
Date Posted: January 09, 2005 at 8:36 PM
profuse007 , can you show me how to wire the Dei part#451m so It can roll the window up/down ..thanks



Posted By: hanhpham2k
Date Posted: January 11, 2005 at 9:08 PM
any body knows which is the factory disarm wire in the car besides the one in the door ...thanks alot



Posted By: misterjimbo
Date Posted: January 12, 2005 at 8:00 AM

you dont want the factory disarm wire in the door? ok use this one... its in the door. it is at the module. dei says its data bus comming in the car so you have to go to the driver door module



-------------


Print Page | Close Window