Print Page | Close Window

2003 Durango Door Trigger Issues

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=47338
Printed Date: June 04, 2024 at 7:31 AM


Topic: 2003 Durango Door Trigger Issues

Posted By: chrisdeaner
Subject: 2003 Durango Door Trigger Issues
Date Posted: January 10, 2005 at 12:00 AM

I've been trying to fix a remote start system for some time in my friend's 2003 Dodge Durango. The current issue is the door triggers. I've tried wiring them a bunch of different ways but haven't found any that work. Currently, I have them setup according to the graphic in this post. It works for blocking the lines going negative from the brain in the car (a "feature" on Durangos if you're unfamiliar) however, the door triggers don't cause the alarm to go off when they're supposed to. Is this due to bad current in the lines (ie: should I add a relay?) or are there other possibilites?
Thanks!
Chris



Replies:

Posted By: secureauto
Date Posted: January 10, 2005 at 12:38 AM
Diode isolate the door triggers and use a relay to avoid falsing problems.

-------------
ASE Certified



Posted By: secureauto
Date Posted: January 10, 2005 at 12:51 AM
I modified one of the relay diagrams and here it is hope it helps.

posted_image

-------------
ASE Certified



Posted By: chrisdeaner
Date Posted: January 10, 2005 at 2:47 AM
that's what i figured...thanks!
-Chris


Print Page | Close Window