01 Montero remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=47349
Printed Date: September 15, 2025 at 6:47 PM

Topic: 01 Montero remote start

Posted By: sasa929
Subject: 01 Montero remote start
Date Posted: January 10, 2005 at 9:14 AM

Hi installed aps 996c security alarm with remote start and i need solution for transponder bypass. Does any one knows
how to do this or what transponder module i need to make this work.
Thanks

Replies:

Posted By: jaurora
Date Posted: January 10, 2005 at 9:24 AM

Using a transponder bypass is the easiest of them all. DEI makes a good bypass kit. I think its the 555U.

one wire goes to the alarm output before remote start (yellow/black on the 4 wire harness of the APS-996) and the other gets 12 V. A copper coil goes around the key cylinder and has a plg that plugs into the box.

Thats it.

-------------
MECP certified (If it really means anything)
Jeremy

Print Page | Close Window