can someone provide me the wiring diagram for this car?
I would really appreciate it.
Also, does anybody know if this car is equipped with a factory
alarm or a transponder ?
Thanks in Advance,
Jeff
double check your wires!!
Remote Starter Wiring Colors and Notes |
Function | | Vehicle Color | Location |
Start: | | BLACK/ White | Ignition Switch Harness* |
Ignition #1: | | BLACK / YELLOW | Ignition Switch Harness |
Ignition #2: | | N/A | not needed |
Ignition #3: | | N/A | **** |
Accessory: | | BLACK/ Red | ign |
Brake Light: | | WHITE/ Black | At Brake Switch |
Tach Signal: | | Blue | At Coil Pack |
Parking Lights: | | RED / Yellow or Blue | At Light Switch*** |
Headlights: | | N/A | not recommended |
Diesel Glow Plug: | | N/A | Not Applicable |
Clutch Bypass Wire: | | No Color Available | Please call with information |
Notes: | | *Equipped with transponder-anti-theft system - Use Universal Alarm Bypass Module. *** Must test parking lights. May be positive or negatice depending on the location you are attaching to the wire. |
-------------
MECP certified (If it really means anything)
Jeremy
Thanks but do you more detailed one with all the wires thats needed to install
a full alarm system? ie door trigger wire? power locks? fac disarm wire?
Alarm and Keyless Entry Wiring Colors and Notes |
Function | | Vehicle Color | Location |
Constant +12 Volts: | | White | Ignition Switch Harness* |
OEM Alarm Disarm: | | WHITE/ Red | At Module Near Drivers Kick Panel |
Dome Lights/Superv: | | No color available | Please call with information |
OEM Horn: | | No Color Available | Please call with information |
Power Lock: | | WHITE/ Blue | At Module Near Drivers Kick Panel** |
Power Unlock: | | WHITE/ Green | At Module Near Drivers Kick Panel |
Trunk Release: | | YELLOW /GREEN | At Module Near Drivers Kick Panel |
Alarm Input Wire: | | No color available | Please call with information |
Notes: | | *Use constant power only for alarm or keyless modules, never remtoe start. ** Horn can also be found as an Orange in the Steering Column Harness. Note: Factory hood pin is GREEN/ Black at module near Driver Kick Panel. |
-------------
MECP certified (If it really means anything)
Jeremy