Print Page | Close Window

2001 s10 remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=47403
Printed Date: July 12, 2025 at 10:41 AM


Topic: 2001 s10 remote start

Posted By: mbender
Subject: 2001 s10 remote start
Date Posted: January 10, 2005 at 9:06 PM

I have an amega rs-4lx add on remote start i want to install in my 2001 s10.  I need a negative pulse to activate the remote start and dont know where to get it from the factory keyless entry. any info would be awesome



Replies:

Posted By: gcorrea
Date Posted: January 14, 2005 at 9:30 PM

some factory keyless entrys dont support or have this feature.



-------------
gcorrea



Posted By: Jschult3
Date Posted: January 15, 2005 at 10:50 AM

If the system honks the horn you may be able to grab the output of the factory alarm but you will need to do some probing. When you find the horn output wire, if you have one, verify it's polarity with your DMM. Now you'll need to convert the wire into a pulsed wire for only a second or two.

Try this- Your panic wire most likely comes on and off to pulse the horn. You'll need to convert to a single pulse each time you press the panic button on your remote. As we've all said before it's easier to just get a new RS/Alarm system that does it all. This diagram certainly isn't for the faint of heart and still may not work.

posted_image



-------------
Jeff
Always Verify Wire information before Connecting! Just a Darn Good DIY'R


Print Page | Close Window