2003 Honda Odyssey driver door module
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=47484
Printed Date: July 18, 2025 at 9:58 PM
Topic: 2003 Honda Odyssey driver door module
Posted By: olivtech
Subject: 2003 Honda Odyssey driver door module
Date Posted: January 11, 2005 at 8:40 PM
Hello, I need to disarm the OEM alarm on a 2003 Honday Odyssey EX. I understand that the wire that I need to find is suppose to be blue (-) and is located in the driver door module. The problem is I dunnot know how to access this module. I unscrewed the window control panel on the driver door to check if I can see/access the driver door module but I only saw a black box that is not accessible from the window control panel. Can someone indicate the steps in order to properly access the driver door module, what I need to unscrew from the door and which panels I have to remove from the driver's door and how (the proper steps to access the module and to run a wire through the door to the driver kick panel).
Also I am wondering if I really need to put apart the driver door or if I can find the wires on the driver kick panel where the door wires come (I have not found any blue wire out of the driver kick panel from door wires).
Thanks for any help.
Oliv
Replies:
Posted By: JWorm
Date Posted: January 11, 2005 at 8:51 PM
The drivers door module is actually the drivers window switch.
Posted By: olivtech
Date Posted: January 11, 2005 at 9:32 PM
Tks JWorm this is a very useful information :)
Now I just checked and in my car the blue wire is not the disarm oem alarm. I have identified the disarm oem alarm wire which is the BLACK/ red wire and seats just next to the blue one. I think it is a useful information for any 2003 Honda Odyssey owner (I have the 2003 EX-L nav).
Ok so now I just need to put a wire in the middle of the wires and push it till it appears in the driver kick panel, right? (I guess there are no other easier way)
|