Print Page | Close Window

Shock Sensors

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=47558
Printed Date: May 02, 2024 at 9:22 AM


Topic: Shock Sensors

Posted By: meh66
Subject: Shock Sensors
Date Posted: January 12, 2005 at 5:37 PM

I was wondering if you can add a shock sensor to a factory alarm? If so, how would I interface it? The vehicle is a 2000 Toyota Sienna.

-------------
MEH66
"Car Performance and Mobile Electronic Enthusiats"



Replies:

Posted By: misterjimbo
Date Posted: January 12, 2005 at 7:39 PM
dei makes a shock sensor specifically for that purpose. i do not kow the part number, but i put one on a caddy once. worked prety good too. no money in the install, but the customer was happy

-------------




Posted By: dyer
Date Posted: January 12, 2005 at 11:32 PM
I think you are looking for DEI's 504K. that should work.

-------------
Dyer





Print Page | Close Window