nissan remote start/keyless entry

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=47772
Printed Date: July 18, 2025 at 4:23 AM

Topic: nissan remote start/keyless entry

Posted By: jaurora
Subject: nissan remote start/keyless entry
Date Posted: January 15, 2005 at 12:55 PM

This may be a dumb question but here is the problem. I installed a r/S keyless and everything is fine except when I put the key in during remote start and turn it to the run position during the key passing ACC the starter grinds for a second. What causes this and how can it be fixed. It is a prestige APL55-LRA, and the vehicle is a 2000 nissan exterra.

Your fast response it greatly appreaciated.

-------------
MECP certified (If it really means anything)
Jeremy

Replies:

Posted By: gus1
Date Posted: January 15, 2005 at 12:59 PM

Interrupt the accessory from the remote starter to the car. I basically set it up like a starter kill, using GWR on pin 86, keysense on 85. Customer puts the key in, the accessories drop out, turn to "run", they come back.
No "zing" fromstarter.

Gus

-------------
Wherever I go, that is where I end up......

Posted By: jaurora
Date Posted: January 15, 2005 at 1:08 PM

I eaiser terms What output would I use? Your saying hook it up as a starter kill but use the acc wire instead og the starter wire?

-------------
MECP certified (If it really means anything)
Jeremy

Print Page | Close Window