Print Page | Close Window

shock sensor

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=47776
Printed Date: July 22, 2025 at 4:01 AM


Topic: shock sensor

Posted By: wgasca
Subject: shock sensor
Date Posted: January 15, 2005 at 1:25 PM

what is a good place to mount the shock sensor in a 01 honda accord lx sedan?



Replies:

Posted By: KarTuneMan
Date Posted: January 15, 2005 at 1:36 PM

It depends on if its a mechanical shock sensor (like DEI's stinger double guard) or an electronic sensor.

I prefer electronic, you mount them so a SOLID surfice.  The DEI style needs to be mounted to a large factory harness, or the steering column.  They are WAY TO HARD to adjust if mounted on a solid serfice. I have posted on this issue before and gotten LOTS of argument about my suggestion for the DEI style sensor......read the instruction.



-------------



Posted By: Jschult3
Date Posted: January 15, 2005 at 1:45 PM
CarTuneMan is correct, I set dei's for mid sens at zip tie to a large wire harness. Don't do the steering column. Even DEI says not to put it there. It makes the front of the car over sensitive and the rear almost non existent.

-------------
Jeff
Always Verify Wire information before Connecting! Just a Darn Good DIY'R


Print Page | Close Window