2001 dodge ram heated mirrors

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=47806
Printed Date: July 18, 2025 at 6:16 AM

Topic: 2001 dodge ram heated mirrors

Posted By: jaurora
Subject: 2001 dodge ram heated mirrors
Date Posted: January 15, 2005 at 9:10 PM

I have the viper 791xv and I was wondering if anyone has ever tried hooking up heated mirrors to an AUX channel? The mirror switch is a push button. Push it once then it sets a( timer/heat sense limit?)

-------------
MECP certified (If it really means anything)
Jeremy

Replies:

Posted By: slammedb5
Date Posted: January 16, 2005 at 4:56 AM

Just use any unused channel. Hook up vaildity, then a relay.

-------------
EK Civic
security
no audio

Posted By: Jschult3
Date Posted: January 16, 2005 at 9:43 AM

I would pull the switch out and probe it. Look for exactly what it does. Checking for both continuity and polarity. I actually used the traditional truck pop wire on an rx300 with the 791xv. It's set up for validity. So I hold the aux button on the remote, it beeps and presto the rear defogger pops on and off. In my case I just took 1/2 the wire connected to 30, took the other 1/2 and connected to 87. Wired 85 to +12volts, and then connected the RED / white to 86 as the trigger for the relay. Works great.

-------------
Jeff
Always Verify Wire information before Connecting! Just a Darn Good DIY'R