astroflex 91 cutlass door locks ?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=47817
Printed Date: July 15, 2025 at 2:53 PM

Topic: astroflex 91 cutlass door locks ?

Posted By: tommcnamee
Subject: astroflex 91 cutlass door locks ?
Date Posted: January 15, 2005 at 11:10 PM

I'm installing a astroflex autostart on my daughters 91 cutlass supreme. I"m having a hard time with the door locks the wire information I have isn't helping alot. The P3 connections are not clear to me on what wires to use. I have 2 differant wire charts on what wire to use on the drivers kick panel, lock (blue or light blue),unlock (white or black)?

-------------
tom mac

Replies:

Posted By: KarTuneMan
Date Posted: January 16, 2005 at 1:31 AM

You have too understand a standard bosch relay to "get" the P3 connector. All of the wires represent PINS on a typical realy!

Your locks are POS(+) take the wires on the P3 that have the fuses on them and give them 12volts.

Take Blue (unlock) and brown (lock) to you factory wires.

Look in the install manual and it will all make sence!!!

PM me if you need more help......K

-------------

Posted By: tommcnamee
Date Posted: January 17, 2005 at 7:59 PM

Thanks alot KarTuneMan your help was right on! Guys like you make this a great site!

-------------
tom mac

Print Page | Close Window