Print Page | Close Window

Clifford G4 with Intellistart In mitsu

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=47820
Printed Date: July 17, 2025 at 11:39 PM


Topic: Clifford G4 with Intellistart In mitsu

Posted By: Nchand247
Subject: Clifford G4 with Intellistart In mitsu
Date Posted: January 15, 2005 at 11:44 PM

The remote start works fine yet the overrev protect often shuts the car down in the mornings.. I  have the clifford wizard software but nothing on how to change that. I believe the remote start cant be done in tachless mode and has to have a tach input. Its a clifford arrow 3 with a g4 intellistart add on..

the car is a 02 mistu lancer..  when remote started.. the car starts (after 2 attemps usually) and then when it does start it revs high and shuts down!

anyone know a fix for this problem?

thanks



-------------
NCHAND247



Replies:

Posted By: OmarR
Date Posted: January 16, 2005 at 5:10 PM
Program the  tach at a higher RPM


Print Page | Close Window