2000 hyundai elantra

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=47849
Printed Date: May 20, 2024 at 6:56 PM

Topic: 2000 hyundai elantra

Posted By: ksingh
Subject: 2000 hyundai elantra
Date Posted: January 16, 2005 at 12:57 PM

hey whats up guys can anyone please send me a better info sheet on this car 2000 hyundai elantra the one that 12volt gives dont have the door lock and unlock wires and some are not even accurate

please send quickly thanks

-------------
Kenny

Replies:

Posted By: swamprat323
Date Posted: January 16, 2005 at 1:14 PM

For power locks You have to add a actuator to the driver door only, it has a central lockign system.

Posted By: ksingh
Date Posted: January 17, 2005 at 5:43 PM

ok i never installed the add on actuator into the central door locking system so i would like to know if anyone out there can please guide me through this. I am using the viper 791 alarm. Now I am wondering how do i wire up this actuator and do i need a relay or what and how do this work

please if you have any diagrams please send me or just please send me all the info you can about this problem cause i need to complete the job

that is all that i am missing so i have until the weekend to figure out how to do this thanks

-------------
Kenny

Posted By: ksingh
Date Posted: January 17, 2005 at 5:48 PM

oh ok swamprat323 i appreciate that info saved me alot of time going on a mission looking for the lock and unlock wires. Now i never had the chance to work with the central locking system so i will need all the info as possible. Like how to wire up the actuator,do i need a relay, and where do i hook the lock and unlock wires up too, please if anyone have any info or any diagrams on this please send it to me i have until this weekend to figure out how to do that task. Thank you guys for taking ur time and reading my post. Please help me out as much as you can

-------------
Kenny