02 cavalier, factory key fob to arm/disarm alarm?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=47863
Printed Date: May 17, 2024 at 8:24 PM
Topic: 02 cavalier, factory key fob to arm/disarm alarm?
Posted By: repmud
Subject: 02 cavalier, factory key fob to arm/disarm alarm?
Date Posted: January 16, 2005 at 4:56 PM
I did some searching only to find out that it looks like I have to use my factory key fob to arm/disarm alarm on my 02 cavalier. Is this true? I did see a post by Sparkie though, that mentioned a GMDACAV, I think it was for an 04 cavalier. He said it is specially made for cavaliers and sunfires. Does anyone have any more info on this module?
thanks.
Replies:
Posted By: mobileworks
Date Posted: January 16, 2005 at 7:33 PM
you shouldn't have any problems with the 02 cav. use a PLXR or PLDATA or other module for Passlock 2. -------------
Posted By: gus1
Date Posted: January 17, 2005 at 11:15 AM
GMDATACAV= POS. I have yet to have one actually work properly.... they been disco'd by Automobility as far as I can tell. You can try the GMDLBP, but it looks like it only does the passlock portion, nothing ofthefactory content theft stuff.
Use a 555L, do doorlocks and trunk release, pull the batteries out of the factory remotes and put them in a little baggie in the glovebox. The factory alarm only arms with the remote.... don't use the remote, nothingto worry about.
Gus
-------------
Wherever I go, that is where I end up......
Posted By: mladams
Date Posted: January 17, 2005 at 3:03 PM
I agree with gus 1. unlock the doors with the factory remote and ditch them in the glove box. As soon as the factory alarm is deactivated with the keyfob it remains deactivated.
-------------
Matt Adams
Electrical Engineer Major
York College of PA
Chevy Cavy Rally Sport
|