1997 Toyota landcruiser

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=47875
Printed Date: July 13, 2025 at 8:32 PM

Topic: 1997 Toyota landcruiser

Posted By: g0a_
Subject: 1997 Toyota landcruiser
Date Posted: January 16, 2005 at 7:06 PM

Hi guys

Just did a landcruiser diode isolated the door lock wires as is well known but have a wierd problem =(

my alarm will not lock automatically with ignition

i programed it 3 times but unlock with igntion off works

all normal locking and unlocking with arm/ disarm works

any ideas?

Joey

-------------
Joey
Audio Illusions
3117 Hwy 70 SE
Hickory NC 28658
828-466-1515
Zero tolerance policy on prefab boxes
100% custom

Replies:

Posted By: italnpimp59
Date Posted: January 16, 2005 at 7:09 PM

i know most ingnition controlled locks will not work if a door is open. maybe you had a door open when testing this or maybe you have the wrong door trigger wire

-------------

Posted By: xtreme069
Date Posted: January 18, 2005 at 6:27 AM

if the 1997 is an 80 series which i think it is there is no need to diode isolate the lock wires instead find the green box in the drivers door or passenger i'm from australia your setups my be different being that you will be working on a left hand drive car and do as the diagram shows

posted_image

try this may save you some time next install it may also solve your ingnition lock problem don't ask me why it works it just does the diagram was taken from the secure section of www.dynamco.com.au good look let me know how you go

-------------
I Love This Industry!!

Print Page | Close Window