resetting alarm ?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=4788
Printed Date: October 31, 2024 at 7:07 PM

Topic: resetting alarm ?

Posted By: sador
Subject: resetting alarm ?
Date Posted: October 24, 2002 at 7:13 PM

Hi everybody!!! posted_image

Can someone tell me how you can reset the viper alarms?

Replies:

Posted By: mikec
Date Posted: October 24, 2002 at 7:46 PM

un plug it then plug it back up whats it doing why you need to rest?

Posted By: djfearny2
Date Posted: October 24, 2002 at 8:10 PM

yea either unplug all harnesses from alarm or disconnect negative side of batt for a few minutes. than put it bck and yes why do you need to do this.

-------------
Jon
Installer/Help Technician
---coral springs florida---
mecp certification is not always needed. I have it and it has not helped me out at all. my experience out shines it.

Posted By: SOUND PRESSURE
Date Posted: October 24, 2002 at 10:26 PM

You could disconnect it reconnect it then turn the ignition on then back off.

-------------
Sound Pressure

You know you have the right amount of pressure when your eyes start to water! Now you've got Juice!

Print Page | Close Window