2000 Honda Civic EX alarm help
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=47904
Printed Date: July 17, 2025 at 6:00 AM
Topic: 2000 Honda Civic EX alarm help
Posted By: DUTTON
Subject: 2000 Honda Civic EX alarm help
Date Posted: January 17, 2005 at 12:31 AM
Has anyone ever installed a compustar remote start and alarm before on a 2000 honda civic. I have most the wires figured out, but I don't know what to do with the - door trigger, - dome supervision, factory alarm arm, factory alarm disarm, power losk, power unlock, second ignition, and second accessory. I own the compustar cm3000, so any help for my project would be greatly appreciated. Thanks Dutton
Replies:
Posted By: profuse007
Date Posted: January 17, 2005 at 3:30 AM
door trigger- | DOOR TRIGGER|lt. GREEN/ red |- |OEM alarm plug *3
*3 The OEM alarm plug is to the right side of the steering column. The plug is green.
- dome supervision- i dont think you need it, the car turn on dome light after unlock.... if i remember correctly.
factory alarm arm, factory alarm disarm- dont need these
power losk- | POWER LOCK|GREEN / WHITE |- |keyless entry module *2 |
power unlock, - | POWER UNLOCK|GREEN/ orange |- |keyless entry module *2 |
*2 The keyless entry module is white in color, and located in the drivers kick panel.
second ignition,- | SECOND IGNITION|yellow |+ |ignition harness |
second accessory- the car only has one acc wire
-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).
Posted By: DUTTON
Date Posted: January 17, 2005 at 9:15 PM
Thanks for the help! I finished wireing and soldering all the wires of my compustar CM3000 alarm/rs and I have not been able to get any response from it. I connected the Status Out wire to the to the BLACK/ blue wire above the clutch pedal, is this correct? After I start the car and let it idle down I get no response from the siren or the lights? What could that be? I tried to program the remote and I did here the relays, but it still doesn't respond. I don't have the second ignition 200mA output (-), should I hook it up using a relay? ANy help would be much appreciated! Thanks Again, Dutton
Posted By: Velocity Motors
Date Posted: January 17, 2005 at 10:17 PM
Did the remote control program properly ? Make sure that you remove the tape from the battery in the back as well. When you toggle the ignition 5 times you have to do it REALLY FAST ( like 5 times in less than 3 seconds would be ideal ). Once you do this, press button # 1 on the 2 way remote and also press the LOCK button on the one way remote. You must also have the hood down when trying the remote start & close the doors when trying the arm/disarm.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: DUTTON
Date Posted: January 30, 2005 at 12:53 AM
The remote seems to program fine, but nothing happens when I hit the buttons. I have no idea what could be going on, anyone that has installed a rs/alarm on a honda civic please help! Any suggestions? Thanks Dutton
Posted By: DUTTON
Date Posted: February 17, 2005 at 1:07 AM
I finally found out what to do without any help from other users! The compustar manual says to progema the remote by turning the car on and off 5 times, this is wrong turn the car from acc to on 5 time and it will work perfect. Thanks for the non-help all you professionals! Now I am a perfect user of the civic so anyone that has questions about installs for anything relating to 96-2000 civic let me know!
Posted By: profuse007
Date Posted: February 17, 2005 at 1:10 AM
i think jeff stated that 3 post above, plz read.....
-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).
Posted By: DUTTON
Date Posted: February 19, 2005 at 2:52 AM
sorry everyone I was not trying to be a dick, thanks for all that responded! I was just getting upset that I could not get the alarm to work. Thanks again! Sorry to doubt any other members since I owe everything regarding my install to you guys. Thanks again!
|