remote 791vx problem
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=48035
Printed Date: May 10, 2025 at 2:51 PM
Topic: remote 791vx problem
Posted By: woeful
Subject: remote 791vx problem
Date Posted: January 18, 2005 at 6:40 PM
my remote stop working, it was still working this morning, and then when I came out this afternoon, it stop working. I press all 4 button but the car doesn't do anything. I did a search, and someone mention to open the remote up, check for the unsoldered, but I have also check, couldn't found it, maybe I am not looking at the right place?, can someone help please? I have already open up the remote so I can't send it back to DEI
Replies:
Posted By: profuse007
Date Posted: January 18, 2005 at 6:50 PM
the 790xv had that program, one of the soldered harness fell off the board.
so ur remote doesnt turn on or the alarm doesnt respond?
-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).
Posted By: woeful
Date Posted: January 18, 2005 at 7:40 PM
the remote turn on, but the alarm doesn't respond, I have an extra compustar remote, will that work with viper?
Posted By: Jschult3
Date Posted: January 18, 2005 at 8:44 PM
If none of the functions work, you prob need a new remote. DO a search on viper responder and a bunch of stuff will come up, ebay, various web sites etc... You prob already tried it but, here goes, new battery needed? Good Luck, ------------- Jeff
Always Verify Wire information before Connecting! Just a Darn Good DIY'R
Posted By: woeful
Date Posted: January 18, 2005 at 9:51 PM
...have to waste another hundred, grrr can't ever save money, everytime I try to save money, something else always come up, like tire blown, tickets,....sh%t
Posted By: woeful
Date Posted: January 18, 2005 at 9:53 PM
yup already replace the battery, thanks through, still don't work
Posted By: jdmmaSTER
Date Posted: January 18, 2005 at 10:31 PM
Did you try reprogrammaing(re-learning) the remote? ------------- Assumptions are the ideas of fools
|