93 GMC 1500 ex. cab keyless entry

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=48139
Printed Date: May 28, 2024 at 1:08 PM

Topic: 93 GMC 1500 ex. cab keyless entry

Posted By: usermike1123
Subject: 93 GMC 1500 ex. cab keyless entry
Date Posted: January 19, 2005 at 7:34 PM

hello everybody! I am installing an Autopage 750lcd two-way alarm with remote start and keyless entry. I have both (+)12v red wires, the starter, acc, ignition1, tach, and brake all hooked up as well as the system grounded and the alarm function works fine, but I get absolutely no response when I press the start button. Also, I am having trouble figuring out how to wire the keyless entry. I have found the right wires but I think I need to wire in relays.

Anyone who has done one of these in this similar vehicle please help. Thanks!

Replies:

Posted By: Hymer
Date Posted: January 19, 2005 at 7:58 PM

5 wire in the door boot without keyless (+) trigger w/keyless Lock lt blu , unlock BLACK/ red

-------------
Tire Proz Stillwater Mn
High End Restyling and Comlete Repair

Posted By: Craig3708
Date Posted: January 19, 2005 at 8:22 PM

You may need to program tach signal...

Craig.

Posted By: russ lund
Date Posted: January 19, 2005 at 8:55 PM

The door lock/unlock is accessed under the speaker in the dash on the drivers side.Lt blue and blk/wht.You will have to break each connection and use a pair of relays for reverse polarity at rest wiring.

-------------
BigDog