Starter Kill Viper 550

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=4823
Printed Date: August 17, 2025 at 9:35 PM

Topic: Starter Kill Viper 550

Posted By: Pioneer21
Subject: Starter Kill Viper 550
Date Posted: October 25, 2002 at 5:54 PM

Installing Viper 550 into a 98 Blazer, The starter kill relay is prewired into the system, There is orange (pre connected), green, yellow and black. I know the yellow goes to the main pink ignition wire but where do the others go. Any help is greatly appreciated.

Thanks

Replies:

Posted By: mikec
Date Posted: October 25, 2002 at 7:37 PM

cut the start wire now you have two wires right?the green and black will hook to the two!

-------------
audio installer /alarms/moblie video how can i help?????????

Posted By: GheTToBaSS
Date Posted: December 01, 2002 at 11:38 PM

I am getting a Viper 790xv, I think its the same basic features as the 550. Does this starter kill (the one on the Viper 790xv) still work if the alarm brain is unplugged?

What about the DEI "Failsafe Starter Kill" I think that comes with this alarm? Or the one that comes with the 565T-567T Mechanical Hood lock with starter kill ? Are they all the same thing, or are they different and getting both would be better? Will any of them work if the alarm brain is disconnected?

I think what I want is an "open" starter kill how can I get that on the 790xv ?

Thanks!